Victron

A guide to the Victron Products we offer

We are proud to add the Victron products to our already extensive range.

We can now supply a range a Battery Chargers from single output 12V 7A devices up to 24V 100A devices plus a range of Inverter/Chargers up to 5kVA and nearly everything in between!!!  

We also have the software required to set-up and adjust the more sophisticated products in the Victron range.

 Scroll down here for details of Blue Power Charger, Multiplus Inverter/Charger , Phoenix Charger


Blue Power IP20 Battery Chargers – no fan

The new Blue Power Battery Charger IP20 180-265VAC features natural convection cooling. No fan, no noise. The battery charger is also protected against overheating: output current will reduce as temperature increases up to 60°C, but the Blue Power charger will not fail.

Also available – Three outputs:

Two new models have recently been added to our Blue Power Charger range: the 12V 25A and the 24V 15A model, both with three isolated outputs to simultaneously charge 3 battery banks. Each output is capable to supply the full rated current.

They all have Adaptive 4-stage charge characteristic: bulk – absorption – float – storage:

The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.

The range includes single output 12V versions giving 7A/10A/15A or 25A out and three output versions giving 12V at 25A or 24V at 15A out.

MultiPlus Inverter/Charger 800VA to 5kVA 230V

Multi-functional

The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.

Unique PowerAssist feature

The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Uninterrupted AC power (UPS function)

In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually unlimited power thanks to parallel operation

Up to 6 Multi’s can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check the datasheets to see which models have paralleling, three-phase and split phase capabilities.

Phoenix Inverters 180VA to 1200VA 120V and 230V

Pure sinewave output, high peak power and high efficiency.

Combined high frequency and line frequency technologies ensure the best of both worlds.

Models range from 150VA to 3000VA per module.

Scalable: up to six Phoenix Inverters 3000 can be paralleled in single phase, split phase and three phase configuration.

Two New Models available: 12V 800VA and 12V 1200VA

New & improved design, very high peak power.

Extra features of the models:

800VA: Improved peak power capability

1200VA: Extremely compact housing